TITLE

Some questions about equivalent circuit synthesis and nonlinear electrical circuit implementation with the specified properties in the electronic simulation tasks

AUTHOR(S)
Pivnev, Vitaly Viktorovich; Basan, Sergey Nikolaevich
PUB. DATE
October 2014
SOURCE
Applied Mechanics & Materials;2014, Issue 670-671, p1454
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
In this paper we consider the problem of synthesis of equivalent circuits containing nonlinear electrical circuits, in general, any number of non-linear elements. The system of differential equations describing the linear non autonomous multi-pole after quasi equivalence transformations allows to synthesize an equivalent circuit of the multi-pole consisting of two-pole linear, nonlinear resistors, controlled voltage sources, etc. The question of replacing the series-connected voltage sources controlled by the operational amplifier, the implementation of linear and nonlinear two-pole resistors.
ACCESSION #
99655316

 

Related Articles

  • Some questions about equivalent circuit synthesis and nonlinear electrical circuit implementation with the specified properties in the electronic simulation tasks. Pivnev, Vitaly Viktorovich; Basan, Sergey Nikolaevich // Applied Mechanics & Materials;2014, Issue 667-679, p1454 

    In this paper we consider the problem of synthesis of equivalent circuits containing nonlinear electrical circuits, in general, any number of non-linear elements. The system of differential equations describing the linear non autonomous multi-pole after quasiequivalence transformations allows to...

  • PSPICE analysis of the Lorenz circuit using the MOS resistor. Sung-Hyun Ji; Boo-Kang Kim; Sang-Guk Nam; Van Ha Nguyen; Yong Su Park; Han Jung Song // Journal of the Korea Academia-Industrial Cooperation Society;2015, Vol. 16 Issue 2, p1348 

    In this paper, chaotic circuit of the voltage controlled Lorentz system for engineering applications has been designed and implemented in an electronic circuit. The proposed circuit consists of MOS variable resistor, multipliers, capacitors, fixed resistors and operational amplifiers. The...

  • Inverting sample-and-hold amplifier requires no external resistors. Štofka, Marián // EDN;8/2/2007, Vol. 52 Issue 16, p68 

    The article focuses on the inverting sample-and-hold amplifier, an operational amplifier with voltage feedback from two resistors. It states that the values of its resistors are usually equal, and should be high enough to decrease the total power loss, which is proportional to the square of the...

  • Resistive DAC and op amp form hybrid divider. Štofka, Marián // EDN;9/17/2009, Vol. 54 Issue 18, p48 

    The article explains the process of creating a hybrid analog-digital-analog divider using a resistive digital-to-analog converter (DAC) in a resistive-feedback loop of an operational amplifier. Formulas for voltage gain, direct intercapacitance, resistance between the terminals of the analog...

  • BAKER'S BEST: Understanding CMR and instrumentation amplifiers. BAKER, BONNIE // EDN Europe;Jan2010, Vol. 57 Issue 1, p3 

    The article presents information about the common-mode rejection (CMR) for operational or instrumental amplifiers (op amp). The most important factor which affects the CMR of an instrumental amplifier is the balance of the resistor ratios across the system. The inner working of an op amp with...

  • Audio Buffer and Line Driver with Low Quiescent Current. PETROV, PETRE TZV. // Electronics For You;Mar2015, Vol. 3 Issue 11, p90 

    The article discusses the development of an audio buffer for guitar and line driver with low quiescent current. Factors discussed include quadruple operational amplifiers, resistors and voltage, as well as electric impedance. The construction and testing of the project is given. Diagrams showing...

  • One Resistor Takes The Heat From Single-Supply Op Amps.  // Electronic Design;7/23/2001, Vol. 49 Issue 15, p87 

    Describes how a resistor takes the heat from single-supply operational amplifiers. Connection of a pull-up transistor, with a value equal to the load resistor, between the output and the positive supply voltage; Enabling of the amplifier to operate at higher ambient temperatures and drive...

  • Current Mode Biquad Filters Using CFOAs: Additional New Realizations. PRASAD, DINESH; BHASKAR, D. R.; SINGH, A. K. // Journal of Active & Passive Electronic Devices;2014, Vol. 9 Issue 4, p339 

    The authors propose three new current-mode biquad filters using two CFOAs, two grounded capacitors and two to four resistors. The active and passive sensitivities of the proposed configurations are low. The validity of the proposed new biquad filters is established by SPICE simulations.

  • Designing For High Speed In Current-To-Voltage Conversion. Ardizzoni, John // Electronic Design;5/8/2008, Vol. 55 Issue 9, p55 

    The article offers information on choosing and using a digital-to-analog-converter (DAC) and its current-to-voltage-converting operational amplifier (op amp). It explains that choosing DAC and its current-to-voltage-converting op amp depends on the required bandwidth. As the DAC and op amps get...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics