TITLE

Three-dimensional Non-Linear FE Analysis of Shear Stress Distributions in Adhesively Bonded Joint

AUTHOR(S)
Xiaocong He; Yuqi Wang
PUB. DATE
March 2014
SOURCE
Advanced Materials Research;2014, Issue 893, p690
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The aim of this work is to investigate the shear stress distributions across the adhesive layer thickness in single-lap adhesively bonded joint. The shear stress distributions of a single-lap adhesively bonded joint have been investigated using the three-dimensional linear static and non-linear quasi-static finite element method. The analysis results indicate that there are significant differences between the linear static and non-linear quasi-static analyses. The results also show that the maximum value of the shear stress component S13 occurs at the centre line while the maximum of the shear stress components S13 and S23 occur near or at the left-rear corner of the adhesive layer.
ACCESSION #
94738814

 

Related Articles

  • Study on the effect of adhesive thickness of single lap joints using acoustic emission and FEA. Bak, K Mohamed; Kalaichelvan, K; Vijayaraghavan, G K; Dinesh, M; Arumugam, V // Insight: Non-Destructive Testing & Condition Monitoring;Jan2013, Vol. 55 Issue 1, p35 

    Composite structural members, which are widely used in applications such as aerospace, automobiles, marine, architecture etc, have attracted extensive attention in the past decades. Adhesive bonding is a practical method for joining composite materials, though it has low shear and tensile...

  • An Analysis of the Elliptical Cup Hydraulic Drawing Process. Yuung-Ming Huang // Computer-Aided Design & Applications;2012, Vol. 9 Issue 3, p375 

    In this study, finite element was utilized to simulate elliptical cup hydroforming deep drawing to explore the relationship between the punch load and stroke, workpiece thickness changes, the major stress distribution, the punch fillet radius, hydrostatic pressure, deformation mechanism and the...

  • Analysis of steel I-beams with rectangular web openings: experimental and finite element investigation. Morkhade, Samadhan G.; Gupta, Laxmikant M. // Engineering Structures & Technology;Mar2015, Vol. 7 Issue 1, p13 

    Steel I-shaped beams with web openings of shapes like hexagonal, circular and rectangular at regular intervals have been used since last 60–70 years. Therefore aim of this paper is to examine the behaviour of steel I-beams with rectangular web openings by performinganexperimental and...

  • FATIGUE PROPERTIES OF A T TYPE WELDED JOINT IN A SMALL-SIZED SINGLE PASS BOILER HEADER. YAMAKAWA, H.; MURAKAMI, R.; YONEKURA, D.; LEE, S. H.; YAN, N. // International Journal of Modern Physics B: Condensed Matter Phys;10/30/2006, Vol. 20 Issue 25-27, p3836 

    The design of small-sized single pass boilers is usually based on the construction code for small-sized boilers, in Japan. Design methods in this construction code and other country codes have not been clearly defined, although most of small-sized boiler's headers are constructed from two...

  • Numerical investigations on stress distribution and deformation of shaft-hub-connections manufactured by lateral extrusion. Dörr, F.; Funk, M.; Liewald, M.; Binz, H. // AIP Conference Proceedings;May2013, Vol. 1532 Issue 1, p331 

    In this paper residual stresses and radial deformation of the hub of a shaft-hub-connection manufactured by lateral extrusion is examined within different methods. Beside FEA (finite-element analysis) the radial deformation of the external hub contour is determined by using a 3D coordinate...

  • 3D finite element analysis of stress distributions and strain energy release rates for adhesive bonded flat composite lap shear joints having pre-existing delaminations. Parida, S.; Pradhan, A. // Journal of Mechanical Science & Technology;Feb2014, Vol. 28 Issue 2, p481 

    The rate of propagation of embedded delamination in the strap adherend of lap shear joint (LSJ) made of carbon/epoxy composites has been evaluated employing three-dimensional non-linear finite elements. The delamination has been presumed to pre-exist in the thin resin layer between the first and...

  • Evaluation of Adhesive T-joint Using Finite Element Analysis. IZZAWATI, B.; AFENDI, M.; NURHASHIMA, S.; NOR, A.; ABDULLAH, A. R.; DAUD, R. // Applied Mechanics & Materials;2015, Vol. 786, p37 

    This study evaluates the effect of temperature upon adhesive properties and behavior of adhesively bonded T-joint. Finite element analysis is conducted to study the effect of this parameter on the durability joint and stress distribution within the adhesive layer. A series of temperatures and...

  • Finite Element Stress Analysis of Adhesive T-joint with Crack in Fluidization Bed. NOR, A.; AFENDI, M.; MAJID, M. S. ABDUL; IZZAWATI, B.; NURHASHIMA, S.; ABDULLAH, A. R. // Applied Mechanics & Materials;2015, Vol. 786, p53 

    In this study, adhesive T-joint with crack in urea granulator fluidization bed was analyzed by finite element (FE) analysis. Objectives of this project were to examine a series of adhesively bonded T- joints with crack under mode I loading, to evaluate stress analysis of adhesive T-joint with...

  • Numerical Analysis of Multi-Layer on the Stress Distribution in Adhesively Bonded Single Lap Aluminum Joint. Min You; YaLan Zhao; JianLi Li; Yingying Li // Advanced Materials Research;2014, Vol. 1061/1062, p471 

    The effect of dual adhesives to form multi4ayer on the stress distributed in adhesively bonded single lap aluminum joint was investigated using elasto-plastic finite element method (FEM). The results from the numerical simulation showed that the values of the peak stress along the bondline are...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics