TITLE

In Vivo Osteogenesis and In Vitro Streptococcus mutans Adherence: Porous-Surfaced Cylindrical Implants vs Rough-Surfaced Threaded Implants

AUTHOR(S)
Prado, Renata Falchete do; Vasconcellos, Luis Gustavo Oliveira de; Vasconcellos, Luana Marotta Reis de; Cairo, Carlos Alberto Alves; Leite, Daniel de Oliveira; dos Santos, Alessandra; Jorge, Antônio Olavo Cardoso; Romeiro, Rogério de Lima; Balducci, Ivan; Carvalho, Yasmin Rodarte
PUB. DATE
December 2013
SOURCE
International Journal of Oral & Maxillofacial Implants;2013, Vol. 28 Issue 6, p1630
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Purpose: To analyze and compare bone apposition at the interface of commercially available rough-surfaced, threaded implants with porous-surfaced, cylindrical implants after several healing periods in a rabbit model. In addition, the study aimed to elucidate the influence of the implant surface configuration on Streptococcus mutans adherence. Materials and Methods: Using a powder metallurgy technique, a new method was developed to produce titanium implants with a dense core and porous surface to increase bone-implant contact (BIC). Sixty implants were placed in 15 rabbits. In each rabbit, two experimental and two control implants were placed in the right or left tibia. The experimental implants were inserted under pressure into the surgical cavity, while the control implants were self-threaded. The rabbits were euthanized at 4, 8, and 12 weeks postinsertion for undecalcified histologic processing and morphometric evaluation of BIC. Additionally, 16 implants, eight experimental and eight control, were incubated with S mutans to evaluate adherence for each type of implant. Analysis of variance with repeated measures and the Student t test were applied, respectively. Results: Histology showed intimate bone-implant interfaces without soft tissue intervention in both groups. Porous-surfaced cylindrical implants showed a higher BIC (72.41% ± 9.47%) than the rough-surfaced screw implants (61.23% ± 14.12%) (P = .013), while no significant difference in S mutans adherence occurred (P = .351). The implant type effect was more pronounced in the 4-week healing period groups (P = .029). The percentage of BIC was similar throughout the healing periods (P = .333), but gradually increased over time. Conclusion: Within the limitations of this study, the results suggest that the new implant design increased BIC without provoking greater S mutans adherence.
ACCESSION #
93260303

 

Related Articles

  • Biocompatibility and in vivo osteogenic capability of novel bone tissue engineering scaffold A-W-MGC/CS. Chen Li; Guo-Xian Wang; Zheng Zhang; Dan-Ping Liu // Journal of Orthopaedic Surgery & Research;2014, Vol. 9 Issue 1, p1 

    Background This study aims to investigate the biocompatibility and in vivo osteogenic capability of the novel bone tissue engineering scaffold apatite-wollastonite-magnetic glass ceramic/chitosan (A-W-MGC/CS). Methods Rabbit bone marrow stromal cells (BMSCs) were transfected with...

  • In-vitro/In-vivo comparison of leuprolide acetate release from an in-situ forming plga system. Mashayekhi, Roya; Mobedi, Hamid; Najafi, Jamal; Enayati, Marjan // DARU;2013, Vol. 21 Issue 7, p57 

    A poly (lactide-co-glycolide) (PLGA) implant was used to control the release profile of leuprolide acetate (LA) drug. The system is an in-situ polymeric precipitation system. And the formulation consisted of PLGA polymer, LA drug and N-methyl-2-pyrrolidon solvent with no additives. First, the...

  • The Effect of Concentrated Growth Factor on Rat Bone Marrow Cells In Vitro and on Calvarial Bone Healing In Vivo. Yukihiro Takeda; Kokubun Katsutoshi; Kenichi Matsuzaka; Takashi Inoue // International Journal of Oral & Maxillofacial Implants;Sep/Oct2015, Vol. 30 Issue 5, p1187 

    Purpose: Concentrated growth factor (CGF) is an autologous leukocyte- and platelet-rich fibrin biomaterial that has recently been used for bone healing therapy. Previous studies used fibrin membrane or CGF extract without fibrin without soluble factors in vitro. This study investigated the...

  • In Vitro and In Vivo Evaluation of the Osteogenic Ability of Implant Surfaces with a Local Delivery of Simvastatin. Shifang Zhao; Fang Wen; Fuming He; Li Liu; Guoli Yang // International Journal of Oral & Maxillofacial Implants;2014, Vol. 29 Issue 1, p211 

    Purpose: This study established local delivery with a calcium phosphate (CaP) coating and investigated effects of delivery on implant osseointegration by in vitro and in vivo experiments. Material and Methods: Simvastatin was prepared onto titanium surfaces with varying concentration (10-7,...

  • Reflection on design and testing of pancreatic alpha-amylase inhibitors: an in silico comparison between rat and rabbit enzyme models. Khalil-Moghaddam, Shiva; Ebrahim-Habibi, Azadeh; Pasalar, Parvin; Yaghmaei, Parichehreh; Hayati-Roodbari, Nasim // DARU;2012, Vol. 20, p1 

    Background: Inhibitors of pancreatic alpha-amylase are potential drugs to treat diabetes and obesity. In order to find compounds that would be effective amylase inhibitors, in vitro and in vivo models are usually used. The accuracy of models is limited, but these tools are nonetheless valuable....

  • Effects of a Calcium Phosphate-Coated and Anodized Titanium Surface on Early Bone Response. Jung-Woo Koh; Young-Sun Kim; Jae-Ho Yang; In-Sung Yeo // International Journal of Oral & Maxillofacial Implants;2013, Vol. 28 Issue 3, p790 

    Purpose: The aim of this study was to evaluate the effectiveness of a calcium phosphate (CaPO4)-coated and anodized titanium surface in vitro and in vivo. Materials and Methods: A turned surface was employed as a negative control. A sandblasted/acid-etched surface and an anodized surface were...

  • Comparison of Three Inoculation Methods for Bone Tissue Engineering. Gu Cheng; Zhi Li; Hui Lu; Davide, Ongodia; Zubing Li; Xi Chen // International Journal of Oral & Maxillofacial Implants;2012, Vol. 27 Issue 6, p1340 

    Purpose: The purpose of this study was to compare the effectiveness of three methods of cell inoculation on cell growth and bone formation: inoculation of seed cells into the scaffolds from two sides (two-side inoculation method), inoculation of seed cells from one side (single-side inoculation...

  • Folated Synperonic-Cholesteryl Hemisuccinate Polymeric Micelles for the Targeted Delivery of Docetaxel in Melanoma. Varshosaz, Jaleh; Taymouri, Somayeh; Hassanzadeh, Farshid; Haghjooy Javanmard, Shaghayegh; Rostami, Mahboobeh // BioMed Research International;3/8/2015, Vol. 2015, p1 

    The objective of this study was the synthesis of folic acid- (FA-) targeted polymeric micelles of Synperonic PE/F 127-cholesteryl hemisuccinate (PF127-Chol) for specific delivery of docetaxel (DTX). Targeted or nontargeted micelles loaded with DTX were prepared via dialysis method. The effects...

  • Essential oil of Melaleuca alternifolia for the treatment of oral candidiasis induced in an immunosuppressed mouse model. de Campos Rasteiro, Vanessa Maria; da Costa, Anna Carolina Borges Pereira; Araújo, Cássia Fernandes; De Barros, Patrícia Pimentel; Rossoni, Rodnei Dennis; Anbinder, Ana Lia; Cardoso Jorge, Antonio Olavo; Junqueira, Juliana Campos // BMC Complementary & Alternative Medicine;2014, Vol. 14 Issue 1, p454 

    Background The search for alternative therapies for oral candidiasis is a necessity and the use of medicinal plants seems to be one of the promising solutions. The objective of this study was to evaluate the in vitro and in vivo effects of the essential oil of Melaleuca alternifolia on Candida...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics