TITLE

Physicists laser print conducting polymer circuits

PUB. DATE
January 2013
SOURCE
Advanced Materials & Processes;Jan2013, Vol. 171 Issue 1, p13
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The article offers information on the achievement by researchers at the National Technical University of Athens in Greece of thrusting a little amount of solid polymer on the receiving substrate by using laser ablation thus enabling two-dimensional patterns of a shape to be deposited.
ACCESSION #
84953983

 

Related Articles

  • Laser-induced ablation dynamics and flight of thin polymer films. Frank, P.; Shaw-Stewart, J.; Lippert, T.; Boneberg, J.; Leiderer, P. // Applied Physics A: Materials Science & Processing;Aug2011, Vol. 104 Issue 2, p579 

    We investigated the ejection dynamics of triazene polymer layers in the thickness range of 40 nm to 600 nm upon nanosecond laser ablation at a wavelength of 532 nm. The ablation is due to laser-induced thermal degradation of a small part of the polymer in contact with the silicon substrate. The...

  • Nanoscale ablation through optically trapped microspheres. Fardel, Romain; McLeod, Euan; Tsai, Yu-Cheng; Arnold, Craig B. // Applied Physics A: Materials Science & Processing;Oct2010, Vol. 101 Issue 1, p41 

    The ability to directly create patterns with size scales below 100 nm is important for many applications where the production or repair of high resolution and density features is needed. Laser-based direct-write methods have the benefit of being able to quickly and easily modify and create...

  • Critical Temperature Enhancement by Biaxial Compressive Strain in FeSeTe Thin Films. Bellingeri, E.; Pallecchi, I.; Buzio, R.; Gerbi, A.; Marrè, D.; Cimberle, M. R.; Tropeano, M.; Putti, M.; Palenzona, A.; Kaciulis, S.; Ferdeghini, C. // Journal of Superconductivity & Novel Magnetism;Feb2011, Vol. 24 Issue 1/2, p35 

    High-purity epitaxial FeSeTe thin films with different thicknesses were grown by pulsed laser ablation on different substrates. By varying the film thickness, T values of up to 21 K were observed, significantly larger than the bulk value. Structural analyses indicated that the a axis changes...

  • Microwave, magnetic, and structural properties of nanocrystalline exchange-coupled Ni11Co11Fe66Zr7B4Cu1 films for high frequency applications. Yoon, S. D.; Baraskar, A. K.; Geiler, A.; Yang, A.; Pettiford, C.; Sun, N. X.; Goswami, R.; Willard, M. A.; Vittoria, C.; Harris, V. G. // Journal of Applied Physics;Mar2008, Vol. 103 Issue 6, p063917 

    Nanocrystalline structured films of the alloy Ni11Co11Fe66Zr7B4Cu1 were deposited by pulsed laser ablation deposition onto fused quartz substrates. A substrate temperature of 300 °C was found to produce films consisting of body-centered-cubic (bcc) metallic grains suspended in an amorphous...

  • Magnetic nanoparticle composed nanowires fabricated by ultrashort laser ablation in air. Nedyalkov, N.; Nakajima, Y.; Terakawa, M. // Applied Physics Letters;1/25/2016, Vol. 108 Issue 4, p1 

    In this paper, a method for formation of nanoparticle composed wires of magnetic materials is presented. The method is based on ultrashort laser ablation in air at atmospheric pressure in the presence of external magnetic field. The material ablated at these conditions is composed of nanosized...

  • Biophysics: Nanocombinatorics for biology.  // Nature Methods;May2012, Vol. 9 Issue 5, p436 

    The article focuses on the study conducted by L. T. Giam and colleagues which describes the methods to study cell-substrate interactions using massively parallel polymer pen lithography to generate substrates with customized patterns.

  • Effect pigments. Melkeri, Yash; Melkeri, Tipanna // Popular Plastics & Packaging;Jan2017, Vol. 62 Issue 1, p40 

    The article discusses effect pigments that exhibit special effects to substrates to enhance its quality and make it attractive to consumers. It mentions types of pigments depending on nature of the substrate used including polymer stacks, mirror in which colour effect is observed due to the...

  • Macromol. Mater. Eng. 7/2018. Liu, Yiwu; Liu, Junjie; Ding, Qian; Tan, Jinghua; Chen, Junyi; Zuo, Xuri; Tang, Ao; Zeng, Kejian; Chen, Zhiquan // Macromolecular Materials & Engineering;Jul2018, Vol. 303 Issue 7, p1 

    No abstract available.

  • Comparison of Laser Chemical Processing and LaserMicroJet for structuring and cutting silicon substrates. Hopman, Sybille; Fell, Andreas; Mayer, Kuno; Mesec, Matthias; Rodofili, Andreas; Kray, Daniel // Applied Physics A: Materials Science & Processing;Jun2009, Vol. 95 Issue 3, p857 

    This paper deals with the development of a new cutting method for thin silicon solar wafers with liquid-jet-guided lasers (LaserMicroJet®, LMJ, and Laser Chemical Processing, LCP). Several laser systems with different wavelengths were tested to find the optimum laser system and processing...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics