TITLE

SHAPE MEMORY EFFECT IN TiNi ALLOY

AUTHOR(S)
Bratushka, S. N.
PUB. DATE
January 2012
SOURCE
International Conference: Radiation Interaction with Material & ;2012, p290
SOURCE TYPE
Conference Paper
DOC. TYPE
Article
ABSTRACT
This paper reports the application of an nitrogen ion implantation for modification of a shape memory alloy. The surface characterization of equiatomic TiNi alloy was performed with the assistance of transmission electron microscopy techniques and the modifications of the phase composition before and after irradiation are studied at the room and martensitic transformation temperatures by X-ray diffraction methods. We investigated the sequence of transformations for the initial and surface-modified materials. Experimental results of near-surface-layers in ion-implanted TNii alloy are discussed in this paper.
ACCESSION #
76231531

 

Related Articles

  • Investigation on the connecting strength of Fe-Mn-Si-C shape memory alloy pipe coupling. Pinqiang Dai; Lihua Zhou // Journal of Materials Science;Jun2006, Vol. 41 Issue 11, p3441 

    The article presents a study on the connecting strength of pipe coupling made of Fe-Mn-Si-C shape memory alloy. Vacuum induction furnace was used to prepare the alloy for this study. Before being forged, the ingot was homogenized at 1373 Kelvin for 12 hour. The ingot was cut into semi-finished...

  • FEA and Experimental Studies of Adaptive Composite Materials with SMA Wires. Kanas, K.; Lekakou, C.; Vrello, N. // World Congress on Engineering 2007 (Volume 1);2007, p1329 

    This study comprises finite element simulations and experimental studies of the shape memory effect due to the presence of SMA (shape memory alloy) wires in composite materials. FEA was performed using ANSYS, where the prestrain was modelled by equivalent changes in the expansion coefficient of...

  • Caculation of the pull-out force of Ni47Ti44Nb9shape memory ally pipe coupling. Jianbang Zhou; Kelu Wang; Qiang Chen; Guangyuan Wang // Applied Mechanics & Materials;2014, Issue 697, p360 

    Investigation of mechanical state of shape memory alloy pipe-coupling had an important significance in engineering field. Theory of plastic deformation was used to analyze the coupling force in the tube connecting process of NiTiNb shape memory alloy, in this paper. Based on the analyzed results...

  • Actuators and Drivers Based on CuAlNi Shape Memory Single Crystals. Pulnev, S.; Nikolaev, V.; Priadko, A.; Rogov, A.; Vahhi, I. // Journal of Materials Engineering & Performance;Jun2011, Vol. 20 Issue 4/5, p497 

    Our research reported here is concerned with the development of physical aspects of shape memory linear actuators and drivers made from CuAlNi single crystals. Our study is focused on reactive stress generation and reversible deformation in the clamped CuAlNi single crystals due to martensitic...

  • SMA Numerical Modeling Versus Experimental Results: Parameter Identification and Model Prediction Capabilities. Auricchio, Ferdinando; Coda, Alberto; Reali, Alessandro; Urbano, Marco // Journal of Materials Engineering & Performance;Oct2009, Vol. 18 Issue 5/6, p649 

    In this work, we briefly review the one-dimensional version of a well-known phenomenological shape memory alloy (SMA) constitutive model able to represent the main macroscopic SMA macroscopic behaviors (i.e., superelasticity and shape-memory effect). We then show how to identify the needed...

  • Smart Control Systems for Smart Materials. Meier, Horst; Czechowicz, Alexander; Haberland, Christoph; Langbein, Sven // Journal of Materials Engineering & Performance;Jun2011, Vol. 20 Issue 4/5, p559 

    Shape memory alloys (SMAs) are thermally activated smart materials. Due to their ability to change into a previously imprinted shape by the means of thermal activation, they are suitable as actuators for microsystems and, within certain limitations for macroscopic systems. Most commonly used...

  • Modeling of Ultrasonic Initiation of Shape Memory Effect. Rubanik, V.; Klubovich, V.; Shadursky, A. // Journal of Materials Engineering & Performance;Jun2011, Vol. 20 Issue 4/5, p731 

    Modeling of ultrasonic initiation for alloys with shape memory effect is carried out. The ultrasonic heating process is described taking into the account the temperature dependence of the studied material properties. Research process of heat generation for the TiNi samples under the ultrasonic...

  • The Thermal Transformation Arrest Phenomenon in NiCoMnAl Heusler Alloys. Xiao Xu; Wataru Ito; Masashi Tokunaga; Takumi Kihara; Kengo Oka; Rie Y. Umetsu; Takeshi Kanomata; Ryosuke Kainuma // Metals (2075-4701); 

    In this report, we present findings of systematic research on NiCoMnAl alloys, with the purpose of acquiring a higher thermal transformation arrest temperature (TA). By systematic research, TA in the NiCoMnAl alloy systems was raised up to 190 K, compared to the highest TA of 130 K in NiCoMnIn....

  • Effect of grain constraint on the field requirements for magnetocaloric effect in Ni45Co5Mn40Sn10 melt-spun ribbons. Bruno, N. M.; Huang, Y. J.; Dennis, C. L.; Li, J. G.; Shull, R. D.; Ross Jr., J. H.; Chumlyakov, Y. I.; Karaman, I. // Journal of Applied Physics;8/21/2016, Vol. 120 Issue 7, p1 

    The influence of grain constraint on the magnetic field levels required to complete the isothermal martensitic transformation in magnetic shape memory alloys has been demonstrated for a NiCoMnSn alloy, and the magnetocaloric performance of an optimally heat treated alloy was quantified....

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics