TITLE

Modeling of Ultrasonic Initiation of Shape Memory Effect

AUTHOR(S)
Rubanik, V.; Klubovich, V.; Shadursky, A.
PUB. DATE
June 2011
SOURCE
Journal of Materials Engineering & Performance;Jun2011, Vol. 20 Issue 4/5, p731
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Modeling of ultrasonic initiation for alloys with shape memory effect is carried out. The ultrasonic heating process is described taking into the account the temperature dependence of the studied material properties. Research process of heat generation for the TiNi samples under the ultrasonic influence shows that the treatment of the material under the localized acoustic influence causes the constant temperature distribution along the sample. It is possible to control the phase transformation in the material, the speed of its implementation by varying the frequency and amplitude of the ultrasonic vibrations during the phase transition. The aim of this study is the modelling heating of alloys with shape memory effect under ultrasonic action at several resonance frequencies.
ACCESSION #
60939221

 

Related Articles

  • Long-Time Stability of Ni-Ti-Shape Memory Alloys for Automotive Safety Systems. Strittmatter, Joachim; G├╝mpel, Paul // Journal of Materials Engineering & Performance;Jun2011, Vol. 20 Issue 4/5, p506 

    In automotive a lot of electromagnetically, pyrotechnically or mechanically driven actuators are integrated to run comfort systems and to control safety systems in modern passenger cars. Using shape memory alloys (SMA) the existing systems could be simplified, performing the same function...

  • Smart Control Systems for Smart Materials. Meier, Horst; Czechowicz, Alexander; Haberland, Christoph; Langbein, Sven // Journal of Materials Engineering & Performance;Jun2011, Vol. 20 Issue 4/5, p559 

    Shape memory alloys (SMAs) are thermally activated smart materials. Due to their ability to change into a previously imprinted shape by the means of thermal activation, they are suitable as actuators for microsystems and, within certain limitations for macroscopic systems. Most commonly used...

  • Theory and finite element computations of a unified cyclic phase transformation model for monocrystalline materials at small strains. Stein, Erwin; Zwickert, Ole // Computational Mechanics;Sep2007, Vol. 40 Issue 3, p429 

    After a survey the refined numerical treatment and verification is presented for a rate-independent macroscopic unified PT material model (including mass conservation with respect to phase fractions and covexified free energy) by Govindjee and Miehe (Comput Methods Appl Mech Eng...

  • Phase transitions in the shape memory alloy CuAlNi. Musolff, A.; Sahota, H. // Continuum Mechanics & Thermodynamics;Oct2004, Vol. 16 Issue 6, p539 

    Shape memory alloys exhibit a complex load-deformation temperature behaviour. In CuAlNi different maximal recoverable deformations may be observed in tensile experiments. We have found five phases and their corresponding phase transitions, two of them are reversible and the others exhibit...

  • Influence of Ultrasonic Vibrations on Shape Memory Effect. Rubanik, Vasili; Klubovich, Vladimir; Rubanik Jr., Vasili // Materials Science Foundations;2015, Vol. 81/82, p406 

    Abstract. The results of studies on the influence of ultrasonic vibrations (UVs) on shape memory effect (SME) in NiTi alloys are presented. The appearance of shape memory effect is due to changes in the temperature and mechanical stress. They can operate simultaneously under the ultrasonic...

  • Martensitic Transformation and Shape Memory Effect in TiNi-based Alloys During Neutron Irradiation. Belyaev, Sergey; Chekanov, Valery; Kolobanov, Gennady; Konopleva, Raisa; Nakin, Andrey; Nazarkin, Igor; Razov, Alexander; Resnina, Natalia; Volkov, Alexander // Materials Science Foundations;2015, Vol. 81/82, p429 

    The chapter is devoted to a study of the influence of neutron irradiation on the martensitic transformations and shape memory effects in TiNi-based shape memory alloys. Irradiation of the samples was carried out in the low-temperature helium loop of a WWR-M fusion reactor at Petersburg Nuclear...

  • TiNi Shape Memory Foams, Produced by Self-Propagating High- Temperature Synthesis. Resnina, Natalia; Belyaev, Sergey; Voronkov, Andrew // Materials Science Foundations;2015, Vol. 81/82, p499 

    This chapter is devoted to a study of structure, martensitic transformation and shape memory behaviour in TiNi foams produced by self-propagating high-temperature synthesis. The influence of the chemical composition of the Ti+Ni powder mixture as well as pre-heating temperature on the structure...

  • Effect of Surface Oxidation on Shape Memory Behaviour of NiTi Alloy. Mahmud, A. S.; Ng, C. W.; Razali, M. F. // AIP Conference Proceedings;2016, Vol. 1774 Issue 1, p1 

    Heat treatment of Nickel Titanium (NiTi) shape memory alloy at high temperature will result in formation of titanium oxide (TiO2) layer at the surface. TiO2 is a ceramic with higher value of hardness and does not exhibit martensitic phase transformation, thus affects the shape memory behaviour...

  • Stability in Phase Transformation After Multiple Steps of Marforming in Ti-Rich Ni-Ti Shape Memory Alloy. Santos Paula, Andersan; Mahesh, Karimbi; Braz Fernandes, Francisco // Journal of Materials Engineering & Performance;Jun2011, Vol. 20 Issue 4/5, p771 

    Nickel-titanium (Ni-Ti) alloys are the most attractive among shape memory alloys (SMA) due to their good functionality properties coupled with high strength and ductility. The transformation temperatures in Ti-rich Ni-Ti SMA can be altered by subjecting them to suitable thermal and/or mechanical...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics