TITLE

Nature of the multistage transformation in shape memory alloys upon heating

AUTHOR(S)
Sun, L.; Huang, W. M.
PUB. DATE
November 2009
SOURCE
Metal Science & Heat Treatment;Nov2009, Vol. 51 Issue 11/12, p573
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The processes developing in shape memory alloys due to heating with application of load and without the latter are investigated. The accompanying multistage reverse martensitic transformation is studied by the method of differential scanning calorimetry. The causes of the multistage transformation are analyzed.
ACCESSION #
51312621

 

Related Articles

  • Magnetic and martensitic transformations of NiMnX(X=In,Sn,Sb) ferromagnetic shape memory alloys. Sutou, Y.; Imano, Y.; Koeda, N.; Omori, T.; Kainuma, R.; Ishida, K.; Oikawa, K. // Applied Physics Letters;11/8/2004, Vol. 85 Issue 19, p4358 

    Martensitic and magnetic transformations of the Heusler Ni50Mn50-yXy (X=In, Sn and Sb) alloys were investigated by differential scanning calorimetry measurement and the vibrating sample magnetometry technique. In all these alloy systems, the austenite phase with the ferromagnetic state was...

  • Effect of magnetic field on martensitic transition of Ni46Mn41In13 Heusler alloy. Oikawa, K.; Ito, W.; Imano, Y.; Sutou, Y.; Kainuma, R.; Ishida, K.; Okamoto, S.; Kitakami, O.; Kanomata, T. // Applied Physics Letters;3/20/2006, Vol. 88 Issue 12, p122507 

    Magnetic and martensitic transition behaviors of a Ni46Mn41In13 Heusler alloy were investigated by differential scanning calorimetry and vibrating sample magnetometry. A unique martensitic transition from the ferromagnetic austenite phase to the antiferromagneticlike martensite phase was...

  • Metastable effects on martensitic transformation in SMA. Torra, V.; Auguet, C.; Isalgue, A.; Lovey, F. C.; Sepulveda, A.; Soul, H. // Journal of Thermal Analysis & Calorimetry;Nov2010, Vol. 102 Issue 2, p671 

    The use of Shape Memory Alloys (SMA) in technical applications as damping in civil engineering structures requires the characterization of the alloy for each specific application. This involves the evolution of the mechanical properties and damping capacity with the number of cycles, frequency,...

  • Preface. Resnina, Natalia; Rubanik, Vasili // Materials Science Foundations;2015, Vol. 81/82, preceding p4 

    An introduction is presented in which the editor discusses various reports within the issue on topics related to shape memory alloys including the martensitic transformations of such alloys, the physical basis for the development of shape memory alloys, and the methods for controlling functional...

  • Martensitic and magnetic transformations of Ni[sub 2] MnGa-based shape-memory alloys. Inoue, K.; Yamaguchi, Y.; Ohoyama, K.; Note, R.; Enami, K. // Applied Physics A: Materials Science & Processing;Dec2002 Supplement, Vol. 74 Issue 6, ps1061 

    After the observation of a shape-memory phenomenon of a Heusler-type single crystal, Ni[sub 2.18]Mn[sub 0.82]Ga alloy, we carried out powder neutron diffraction of this alloy by changing the temperature. Rietveld analysis of the diffraction patterns revealed that the martensitic transformation...

  • Effect of incomplete transformation on the transformation behavior in TiNi shape memory alloys. Wang, Z.; Zu, X. // Journal of Materials Science;May2005, Vol. 40 Issue 9/10, p2663 

    The article discusses the effect of incomplete transformation on the transformation behavior in shape memory alloys. Martensitic transformation in shape memory alloy occurs between austenite and martensite. During the transformation from austenite to martensite, some elastic strain energy is...

  • THE EFFECT OF CHROMIUM ADDITION ON PHYSICAL PROPERTIES OF Cu-Al BASED HIGH TEMPERATURE SHAPE MEMORY ALLOY. DENIZ ÇIRAK, Z.; KÖK, M.; AYDOĞDU, Y. // Archives of Metallurgy & Materials;2018, Vol. 63 Issue 4, p1595 

    Cu-Al-based high temperature shape memory alloys are preferred commonly due to their cheap costs and shape memory properties. In recent years, studies have been conducted on developing and producing a new type of Cu-Al based shape memory alloy. In this study, the CuAl-Cr alloy system, which has...

  • Martensitic Transformations in a Thin Layer of a Shape Memory Alloy on an Elastic Substrate. Malygin, G. A. // Physics of the Solid State;Jul2001, Vol. 43 Issue 7, p1339 

    A martensitic transformation (MT) in a thin (10-10³ nm thick) layer of a shape memory alloy on an elastic substrate is analyzed theoretically in terms of the theory of diffuse MTs. The relaxation of thermoelastic stresses associated with the MT is considered, and the size effects that...

  • Magnetic and magneto-transport studies of substrate effect on the martensitic transformation in a NiMnIn shape memory alloy. Sokolov, Andrei; Kirianov, Eugene; Zlenko, Albina; Quetz, Abdiel; Aryal, Anil; Pandey, Sudip; Dubenko, Igor; Stadler, Shane; Ali, Naushad; Al-Aqtash, Nabil; Sabirianov, Renat // AIP Advances;2016, Vol. 6 Issue 5, p1 

    The effect of substrates on the magnetic and transport properties of Ni2Mn15In0.5 ultra-thin films were studied theoretically and experimentally. High quality 8-nm films were grown by laser-assisted molecular beam epitaxy deposition. Magnetotransport measurements revealed that the films undergo...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics