TITLE

SHOCK-WAVE RESPONSE OF Ni-Ti SHAPE MEMORY ALLOYS IN THE TRANSFORMATION TEMPERATURE RANGE

AUTHOR(S)
Razorenov, S. V.; Garkushin, G. V.; Kanel, G. I.; Popov, N. N.
PUB. DATE
December 2009
SOURCE
AIP Conference Proceedings;12/28/2009, Vol. 1195 Issue 1, p1027
SOURCE TYPE
Conference Proceeding
DOC. TYPE
Article
ABSTRACT
The behavior of Ni48.9-Ti51.1 and Ni50.6-Ti49.4 shape memory alloys under shock wave loading was investigated in the temperature range of their martensitic transformations. Tested samples had the grain sizes ∼15 to 30 μm and 0.05 to 0.3 μm. Measured free surface velocity histories has demonstrated influence of the martensitic transformation on response of the alloys to shock-wave loading. The dependences of HEL on both the temperature and the alloy composition are similar to quasi-static flow stress data. Refining of the grain size not only increases the HEL values but also shifts the transitions to lower temperatures. The pseudoelastic behavior in sub-microsecond time range results in formation of rarefaction shock.
ACCESSION #
47376166

 

Related Articles

  • The Thermal Transformation Arrest Phenomenon in NiCoMnAl Heusler Alloys. Xiao Xu; Wataru Ito; Masashi Tokunaga; Takumi Kihara; Kengo Oka; Rie Y. Umetsu; Takeshi Kanomata; Ryosuke Kainuma // Metals (2075-4701); 

    In this report, we present findings of systematic research on NiCoMnAl alloys, with the purpose of acquiring a higher thermal transformation arrest temperature (TA). By systematic research, TA in the NiCoMnAl alloy systems was raised up to 190 K, compared to the highest TA of 130 K in NiCoMnIn....

  • Effect of grain constraint on the field requirements for magnetocaloric effect in Ni45Co5Mn40Sn10 melt-spun ribbons. Bruno, N. M.; Huang, Y. J.; Dennis, C. L.; Li, J. G.; Shull, R. D.; Ross Jr., J. H.; Chumlyakov, Y. I.; Karaman, I. // Journal of Applied Physics;8/21/2016, Vol. 120 Issue 7, p1 

    The influence of grain constraint on the magnetic field levels required to complete the isothermal martensitic transformation in magnetic shape memory alloys has been demonstrated for a NiCoMnSn alloy, and the magnetocaloric performance of an optimally heat treated alloy was quantified....

  • An effective interaction potential model for the shape memory alloy AuCd. Guthikonda, Venkata; Elliott, Ryan // Continuum Mechanics & Thermodynamics;Sep2009, Vol. 21 Issue 4, p269 

    The unusual properties of shape memory alloys (SMAs) result from a lattice level martensitic transformation (MT) corresponding to an instability of the SMAs crystal structure. Currently, there exists a shortage of material models that can capture the details of lattice level MTs occurring in...

  • Wide Range Temperature Memory Effect of an In Situ NiTi Alloys Composite. Li, Juntao; Zheng, Yanjun; Cui, Lishan // Journal of Materials Engineering & Performance;Oct2010, Vol. 19 Issue 7, p998 

    Incomplete martensitic transformation characteristics of NiTi shape memory alloys after cold deformation were studied. By designing the shape of the original surface curve, macroscopic domains with different dislocation density were introduced into the NiTi alloys and materials possessing the...

  • The Influence of Compressive Stress on the Order Parameter of 18R Martensites in CuAIBe Shape Memory Alloys. Balo, Ş. Nevin; Ceyland, Mehmet // Turkish Journal of Science & Technology;Jun2009, Vol. 4 Issue 1, p73 

    Phase transformations and order parameter in the shape memory alloys are sensitive to the stress applications and these stresses may cause important changes in crystallographic properties of alloys. In this study, five stage of compressive stress were applied onto two CuAlBe shape memory alloys...

  • Investigation on the connecting strength of Fe-Mn-Si-C shape memory alloy pipe coupling. Pinqiang Dai; Lihua Zhou // Journal of Materials Science;Jun2006, Vol. 41 Issue 11, p3441 

    The article presents a study on the connecting strength of pipe coupling made of Fe-Mn-Si-C shape memory alloy. Vacuum induction furnace was used to prepare the alloy for this study. Before being forged, the ingot was homogenized at 1373 Kelvin for 12 hour. The ingot was cut into semi-finished...

  • SHAPE MEMORY EFFECT IN TiNi ALLOY. Bratushka, S. N. // International Conference: Radiation Interaction with Material & ;2012, p290 

    This paper reports the application of an nitrogen ion implantation for modification of a shape memory alloy. The surface characterization of equiatomic TiNi alloy was performed with the assistance of transmission electron microscopy techniques and the modifications of the phase composition...

  • Caculation of the pull-out force of Ni47Ti44Nb9shape memory ally pipe coupling. Jianbang Zhou; Kelu Wang; Qiang Chen; Guangyuan Wang // Applied Mechanics & Materials;2014, Issue 697, p360 

    Investigation of mechanical state of shape memory alloy pipe-coupling had an important significance in engineering field. Theory of plastic deformation was used to analyze the coupling force in the tube connecting process of NiTiNb shape memory alloy, in this paper. Based on the analyzed results...

  • Effect of incomplete transformation on the transformation behavior in TiNi shape memory alloys. Wang, Z.; Zu, X. // Journal of Materials Science;May2005, Vol. 40 Issue 9/10, p2663 

    The article discusses the effect of incomplete transformation on the transformation behavior in shape memory alloys. Martensitic transformation in shape memory alloy occurs between austenite and martensite. During the transformation from austenite to martensite, some elastic strain energy is...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics