TITLE

Adaptive bonding technique for precise assembly of three-dimensional microstructures

AUTHOR(S)
Park, Sang-Hu; Jeong, Jun-Ho; Choi, Dae-Geun; Kim, Ki-Don; Altun, Ali Ozhan; Lee, Eung-Sug; Yang, Dong-Yol; Lee, Kwang-Sup
PUB. DATE
June 2007
SOURCE
Applied Physics Letters;6/4/2007, Vol. 90 Issue 23, p233109
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Precise fabrication of three-dimensional (3D) self-standing microstructures on thin glass plates via two-photon induced polymerization (TPP) has been an important issue for innovative 3D nanodevices and microdevices. However, there are still issues remaining to be solved, such as building 3D microstructures on opaque materials via TPP and being able to implant them as functional parts onto practical systems. To settle these issues simply and effectively, the authors propose a contact print lithography (CPL) method using an ultraviolet-curable polymer layer. They report some of the possibilities and potential of CPL by presenting their results for transplanting 3D microstructures onto large-area substrates and also their examination of some of the effects of the process parameters on CPL.
ACCESSION #
25449107

 

Related Articles

  • Determining conditions for the preparation of polymer films containing an ordered structure of carbon nanotubes and higher fullerenes. Latypov, Z. Z.; Pozdnyakov, O. F. // Technical Physics Letters;May2006, Vol. 32 Issue 5, p381 

    The experimental conditions necessary for the preparation of polymeric composite films (membranes) containing an ordered structure of single-wall carbon nanotubes and higher fullerenes are determined. The films are obtained by ordering a homogeneous suspension of carbon nanotubes and fullerenes...

  • Crosslinking and Crosslink Density. Schoff, Clifford K. // JCT CoatingsTech;Sep2010, Vol. 7 Issue 9, p68 

    The article offers the author's insights regarding the contrast of cure with crosslink density and crosslinking. He mentions that Curing occurs during the achievement of the coating properties in an ambient condition which is evaluated through solvent resistance measurement. He states that...

  • Recent Patents on Light Curing of Dental Materials. De Santis, Roberto; Gloria, Antonio; Ambrosio, Luigi; Nicolais, Luigi // Recent Patents on Biomedical Engineering;Jun2009, Vol. 2 Issue 2, p97 

    Abstract: In the last few decades photo-polymerization, the use of light for curing resins, has been a field of multidisciplinary research particularly involving advanced materials and technologies to restore a tooth. Polymers and composites used in the oral cavity in conjunction with light...

  • Effect of curing and pyrolysis processing on the ceramic yield of a highly branched polycarbosilane. Li, Houbu; Zhang, Litong; Cheng, Laifei; Yu, Zhaoju; Huang, Muhe; Tu, Huibin; Xia, Haiping // Journal of Materials Science;Feb2009, Vol. 44 Issue 3, p721 

    In this article, the influence of curing processing on the final ceramic yield of a highly branched polycarbosilane is discussed. Effect of pyrolysis conditions on the ceramic residue is also investigated. The results show that post-treatment can highly increase the crosslinking degree and...

  • Structure and dielectric properties of polymeric composites with ferroelectric fillers. Tchmyreva, Viktoria V.; Ponomarenko, Anatoliy T.; Shevchenko, Vitaliy G. // e-Polymers;Jul2003, p1 

    Studies the structure and dielectric properties of polymeric composites with ferroelectric fillers in wide frequency and temperature ranges. Role of the size and concentration of ferroelectric filler particles on the dielectric properties of polymer composites; Dependence of dielectric...

  • Influence of Melt Mixer on Injection Molding of Thermoset Elastomers. Rochman, Arif; Zahra, Keith // AIP Conference Proceedings;2016, Vol. 1769 Issue 1, p1 

    One of the drawbacks in injection molding is that the plasticizing screw is short such that polymers having high concentrations of additives, such as thermoset elastomers, might not mix homogeneously within the short period of time during the plasticizing stage. In this study, various melt...

  • 3-D lithography. Lerner, Eric J. // Industrial Physicist;Apr/May2003, Vol. 9 Issue 2, p10 

    Reports on researchers' used of two-photon polymerization with femtosecond lasers to develop three-dimensional objects and patterns on the microscopic level. Use of liquid resins that are transparent to infrared light; Disadvantages of commercial resins; Creation of a micrometer-scale statuette...

  • Novel class of low molecular-weight organic resists for nanometer lithography. Yoshiiwa, Motoko; Kageyama, Hiroshi; Shirota, Yasuhiko; Wakaya, Fujio; Gamo, Kenji; Takai, Mikio // Applied Physics Letters;10/21/1996, Vol. 69 Issue 17, p2605 

    A novel class of low molecular-weight organic resist materials for nanometer lithography, 1,3,5-tris[4-(4-toluenesulfonyloxy)phenyl]benzene (TsOTPB) and 4,4′,4″-tris(allylsuccinimido) triphenylamine (ASITPA), was designed and synthesized. TsOTPB with a glass-transition temperature...

  • A combinatorial approach to surface anchored polymers. Wu, T.; Tomlinson, M.; Efimenko, K.; Genzer, J. // Journal of Materials Science;Nov2003, Vol. 38 Issue 22, p4471 

    Recent advances in the field of self-assembly have led to the development of a plethora of new technologies derived from soft lithography that enable alternative ways of fabricating thin films with two- and three-dimensional patterns on material surfaces. Techniques involving the patterning of...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics