TITLE

Looking for design in materials design

AUTHOR(S)
Eberhart, M. E.; Clougherty, D. P.
PUB. DATE
October 2004
SOURCE
Nature Materials;Oct2004, Vol. 3 Issue 10, p659
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Despite great advances in computation, materials design is still science fiction. The construction of structure–property relations on the quantum scale will turn computational empiricism into true design.
ACCESSION #
18445604

 

Related Articles

  • NUMERICAL INVESTIGATION OF THE EFFECT OF BLADE SWEEP AND LEAN ON THE TRANSONIC FAN ROTOR EFFICIENCY. Abdelrahman, M. M.; Owis, Farouk M.; Aziz, M. A. // International Journal of Academic Research;Sep2014, Vol. 6 Issue 5, p211 

    The design of a transonic-fan rotor is investigated numerically using the full three-dimensional Navier- Stokes equations. The CFDRC-ACE multiphysics module, which is a pressure-based solver, is used for the numerical simulation. The optimization process is performed using the simplex algorithm....

  • Runup of Nonlinear Long Waves in Trapezoidal Bays: 1-D Analytical Theory and 2-D Numerical Computations. Harris, M.; Nicolsky, D.; Pelinovsky, E.; Rybkin, A. // Pure & Applied Geophysics;Mar2015, Vol. 172 Issue 3/4, p885 

    Long nonlinear wave runup on the coasts of trapezoidal bays is studied analytically in the framework of one-dimensional (1-D) nonlinear shallow-water theory with cross-section averaging, and is also studied numerically within a two-dimensional (2-D) nonlinear shallow water theory. In the 1-D...

  • Numerical Simulation of an Indentation Process for Defining the Viscoelastic Characteristics of Time-Dependent Materials. Minster, Jir�; Micka, Michal // Journal of Materials Science & Engineering B;2012, Vol. 2 Issue 1B, p81 

    The aim of the paper is to find a practical numerical approach to define the time-dependent mechanical characteristics of a rheonomic material from microindentation data. The ANSYS FEM program for viscoelastic bodies is used for numerical simulations of the indentation process. All three parts...

  • Nanotube-derived carbon foam for hydrogen sorption. Feng Ding; Yu Lin; Krasnov, Pavel O.; Yakobson, Boris I. // Journal of Chemical Physics;10/28/2007, Vol. 127 Issue 16, p164703 

    A new kind of carbon foam, which is based on the welding of single-walled carbon nanotubes, is built in a computer simulation. Its precisely defined architecture and all atomic positions allow one to perform detailed theoretical analysis of the properties. Such foam is as light as 1/9 of steel,...

  • On strength reserve assessment for prismatic folded plate roof structures. Kolchunov, Vitaly; Osovskih, Evgeniy; Afonin, Pavel // Applied Mechanics & Materials;2014, Vol. 740, p922 

    The paper presents the results of experimental studies and numerical simulation of straining and failure of reinforced concrete folded-plate roof structures in limit and out-of-limit states performed on models and real structures taking into account the combined mechanical loads and...

  • Computer simulation of molecular complexes H3O+(H2O) n under conditions of thermal fluctuations: II. Work of formation and structure. Shevkunov, S. V. // Russian Journal of General Chemistry;Oct2004, Vol. 74 Issue 10, p1471 

    The free energy, entropy, and work of formation of H3O+(H2O) n clusters (n=1-27) in water vapor (300 K) were calculated by the Monte Carlo method. Binary correlation functions were calculated. The calculations are based on the nonpair interaction model presented in the previous publication. The...

  • Computer-aided analysis of the forging process. Šraml, Matjaž; Stupan, Janez; Potrč, Iztok; Kramberger, Janez // International Journal of Advanced Manufacturing Technology;Feb2004, Vol. 23 Issue 3/4, p161 

    This paper presents computer simulation of the forging process using the finite volume method (FVM). The process of forging is highly non-linear, where both large deformations and continuously changing boundary conditions occur. In most practical cases, the initial billet shape is relatively...

  • On the problem of construction of the underground contour of water-development works with portions of constant flow velocity. Bereslavskii, É. // Journal of Engineering Physics & Thermophysics;Sep2008, Vol. 81 Issue 5, p862 

    The underground contour of a sunk rectangular apron whose angles are rounded off by the curves of constant filtration rate is constructed in the case where the water-permeable base is underlain by a confining layer with a curvilinear roof, characterized by a constant flow velocity, too. The...

  • Demagnetizing effects in granular hard magnetic bodies. Navau, C.; Chen, D.-X.; Sanchez, A.; Del-Valle, N. // Journal of Applied Physics;May2011, Vol. 109 Issue 9, p093901 

    Hard magnetic materials are usually measured and used in an open magnetic circuit, for which demagnetizing effects are present. The applied field Ha has been conventionally corrected to the volume averaged internal field H by a formula H=Ha-NmM, where M is volume averaged magnetization and Nm is...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics