TITLE

Improved EDFA design reduces gain error function

AUTHOR(S)
Johnson, Paul; Sommer, Rad
PUB. DATE
June 2005
SOURCE
Laser Focus World;Jun2005, Vol. 41 Issue 6, p161
SOURCE TYPE
Periodical
DOC. TYPE
Article
ABSTRACT
Reports on the improvement in the design of erbium-doped fiber amplifiers. Reduction in gain error function; Temperature stabilization; Spectral optimization.
ACCESSION #
17344590

 

Related Articles

  • INFLUENCE OF UPCONVERSION AND PUMP EXCITED STATE ABSORPTION LOSSES ON THE PERFORMANCE OF CO- AND CONTRADIRECTIONALLY PUMPED ERBIUM-DOPED FIBER AMPLIFIERS. Nair, Prita; Sivaram, B. M.; Raina, J. P. // Microwave & Optical Technology Letters;1/1/96, Vol. 11 Issue 1, p45 

    The combined effects of upconversion and pump excited state absorption losses on the gain from co- and contradirectionally pumped erbium-doped fiber amplifiers have been studied experimentally and simulated numerically. Our results indicate that for all fiber lengths, contradirectional gain is...

  • EDFA achieves 94-nm bandwidth.  // Laser Focus World;Sep2005, Vol. 41 Issue 9, p9 

    Reports on the development of a coupled-structure S-to-C-band amplifier with a 94-nanometer gain bandwith from 1476 to 1570 nanometer by scientists at the National Chiao Tung University and the Industrial Technology Institute, Chungwa Telecom Co. and Yuan Ze University in Taiwan. Construction of...

  • SIMULATION OF THE ERBIUM-DOPED FIBER AMPLIFIER CHARACTERISTICS. Ghafouri-Shiraz, H.; Shum, P. // Microwave & Optical Technology Letters;4/1/92, Vol. 5 Issue 4, p191 

    The dependence of the erbium-doped optical amplifier gain upon the fiber length, output signal, and pump power have been theoretically investigated for two pumping wavelengths of 0.98 and 1.48 µm. The analytical results are in fairly good agreement with the reported measured data.

  • Injection locking of an erbium-doped fiber laser-amplifier. Teyo, T. C.; Shah, N. S. M.; Ahmad, H. // Microwave & Optical Technology Letters;1/20/2003, Vol. 36 Issue 2, p89 

    Injection locking of an erbium-doped fiber laser-amplifier is presented. Inside the locking range, the system oscillates at the wavelength of the injected signal. Outside the locking range, both signal and laser oscillate simultaneously in the cavity. Signal detuning studies show that the...

  • Double-pass remotely pumped Er3+-doped fiber amplifier embedded with chirped fiber Bragg grating. Naji, A. W.; Abidin, M. S. Z.; Al-Mansoori, M. H.; Jamaludin, M. Z.; Iqbal, S. J.; Abdullah, M. K.; Mahdi, M. A. // Microwave & Optical Technology Letters;Oct2006, Vol. 48 Issue 10, p1993 

    A highly efficient erbium-doped fiber amplifier configured in double-pass amplification scheme with a chirped fiber Bragg grating is demonstrated in this study. The chirped fiber Bragg grating is used to perform as the reflector and concurrently to compensate the effect of fiber dispersion. The...

  • Design of a sub-13-fs, multi-gigawatt chirped pulse optical parametric amplification system. Schlup, P.; Biegert, J.; Hauri, C.P.; Arisholm, G.; Keller, U. // Applied Physics B: Lasers & Optics;Aug2004, Vol. 79 Issue 3, p285 

    We present a design for phase-locked chirped pulse optical parametric amplification of ultra-short pulses based on Ti:sapphire. A realistic description is given by measuring the oscillator pulse (11.6 fs, 4 nJ) with SPIDER and numerically propagating it through the whole chirped pulse...

  • Rapidly tunable all-optical wavelength converter based on single semiconductor optical amplifier delay interferometer. Kauer, M.; Leuthold, J.; Duelk, M.; Girault, M. // Optical & Quantum Electronics;Jan2003, Vol. 35 Issue 2, p139 

    We demonstrate a rapidly tunable 10 Gb/s all-optical wavelength converter based on a semiconductor optical amplifier delay interferometer and a tunable laser. It uses a 16-channel 100 GHz-spacing digitally tunable multifrequency laser based on a novel external-cavity laser design. The bit...

  • Optical clock recovery from 10-Gb/s NRZ signal after propagation on 100 km of DS, NZD or SR installed fiber. Betti, S.; Curti, F.; Duca, E.; Monterosso, S.; Reale, A.; Tosi-Beleffi, G. M. // Microwave & Optical Technology Letters;2/5/2005, Vol. 44 Issue 3, p264 

    An optical clock has been experimentally recovered by an actively mode-locked fiber ring based on a semiconductor optical amplifier (SOA) from a 10-Gb/s NRZ data stream after propagation on 100 km of installed fiber (either DS, or NZD, or SR). The results indicate the flexibility and robustness...

  • Design of a phase-shifted long-period grating using the partial-etching technique. Chung, Kun-Wook; Yin, Shizhuo // Microwave & Optical Technology Letters;4/5/2005, Vol. 45 Issue 1, p18 

    In this paper, a newly designed reconfigurable phase-shifted long period grating using the partial etching technique is presented. In the locally etched long-period grating, there are discontinuities in the effective refractive index of the cladding modes. The phase shift in the long-period...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics