TITLE

Static And Dynamic Characteristics Of Waste Ceramic Aggregate Fibre Reinforced Concrete

AUTHOR(S)
Cichocki, Krzysztof; Domski, Jacek; Katzer, Jacek; Ruchwa, Mariusz
PUB. DATE
December 2015
SOURCE
Transactions of the VSB - Technical University of Ostrava, Civil;Dec2015, Vol. 15 Issue 2, p1
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
There are multiple obstacles associated both with technology and properties of waste ceramic aggregate concrete preventing its wide production and application. In the research programme these limitations were addressed through utilizing steel fibre reinforcement and the phenomenon of internal curing. After laboratory tests of mechanical properties a numerical analysis of composites in question was conducted.
ACCESSION #
112336948

 

Related Articles

  • Numerical Study on Mixed-mode Fracture in Reinforced Concrete. Yu, Rena C.; Saucedo, Luis; Ruiz, Gonzalo // AIP Conference Proceedings;5/21/2010, Vol. 1233 Issue 1, p143 

    The object of this work is to model the propagation of fracture in mixed-mode in lightly reinforced concrete beams. When a notched beam does not have enough shear reinforcement, fracture can initiate and propagate unstably and lead to failure through diagonal tension. In order to study this...

  • Numerical Studies of Deep Concrete Coupling Beams Retrofitted with a Laterally Restrained Steel Plate. Cheng, B.; Su, R. K. L. // Advances in Structural Engineering;Oct2011, Vol. 14 Issue 5, p903 

    Existing deep reinforced concrete (RC) coupling beams with low shear span ratios and conventionally reinforced shear stirrups tend to fail in a brittle manner with limited ductility and deformability under reversed cyclic loading. Experimental studies have shown that a laterally restrained steel...

  • KOMPOZITINIAIS STRYPAIS ARMUOTŲ SIJŲ PLEIÅ Ä–JIMO IR DEFORMACIJŲ ANALIZÄ–. Timinskas, Edgaras; Jakubovskis, Ronaldas; Mcškėnas, Adas; Gudonis, Eugenijus // Science: Future of Lithuania;Aug2012, Vol. 4 Issue 4, p346 

    The paper discusses the results of experimental and numerical modelling using two beams reinforced with GFRP bars. One beam was made of plain concrete while the other contained short steel fibres. The influence of steel fibres on deflection and cracking behaviour was studied. A comparative...

  • Reinforcement Corrosion versus Crack Width. Peter, KOTEŠ; Ján, KOZÁK // Advanced Materials Research;2014, Issue 897, p161 

    Reinforced concrete is a versatile, economical and successful construction material. Usually, it is durable and resistant material, performing well throughout its service life. However, sometimes it does not perform adequately as it is expected. It is due to poor design, construction, inadequate...

  • Numerical Method of the Axial Force Moment Curvature on RC Section. Kaicheng Yao; Donghua Zhou; Wenyuan Liao; Longqi Li; Guofei Li; Xuyang Geng // Applied Mechanics & Materials;2014, Issue 610, p35 

    Based on the assumption of plane section, ideal elastic-plastic model of steel and the constitutive relations of concrete in Chinese Code for Design of Concrete Structures, numerical method is used to analyze the relationship of the axial force-moment-curvature on RC section. After dividing the...

  • Concrete-Steel Bond Model for Use in Finite Element Modeling of Reinforced Concrete Structures. Lowes, Laura N.; Moehle, Jack P.; Govindjee, Sanjay // ACI Structural Journal;Jul/Aug2004, Vol. 101 Issue 4, p501 

    Reinforced concrete requires bond between plain concrete and reinforcing steel. Accurate numerical modeling of structures that exhibit severe bond-stress demand requires explicit representation of bond-zone response. A bond element is presented for use in high-resolution finite element modeling...

  • The Influence of Hollow Imperfections of Adhesive on Performances of Interface of RC Beams Strengthened with HFRP. Guo Yongchang; Li Lijuan; Deng Jun; Zhong Genquan // AIP Conference Proceedings;5/21/2010, Vol. 1233 Issue 1, p923 

    The mechanical characteristics of the interface with hollow imperfections for reinforced concrete (RC) beams strengthened with Carbon-Glass fiber sheet is discussed, which is a new hybrid strengthening method. By establishing the constitutive equations of different materials, three interfacial...

  • Nonlinear Multiphysic Transitory Analysis of Reinforced Concrete Columns with Respect to the Fire Resistance. Otmani, N.; Guenfoud, M. // International Review on Modelling & Simulations;Aug2009, Vol. 2 Issue 4, p479 

    This paper is devoted to nonlinear numerical modeling of reinforced concrete columns subjected to fire. Today, it is possible to assess the fire behavior of structures by numerical simulation. During a fire, the structure of a building loses its mechanical strength following the increase in...

  • NUMERICAL ANALYSIS OF SUBSOIL-REINFORCED CONCRETE SLAB INTERACTION. LE, Tuan Duc; NGUYEN, Qui Thanh; CAJKA, Radim // Transactions of the VSB - Technical University of Ostrava, Civil;Dec2018, Vol. 18 Issue 2, p60 

    This article presents the numerical modeling of interaction between a reinforced concrete slab and subsoil using ABAQUS. Subsoil was simulated as both homogeneous half-space and inhomogeneous half-space. Reinforcement bars in the concrete slab were accurately modelled allowing capturing a...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics