TITLE

Modeling of Damage due to Shrinkage in Autoclaved Aerated Concrete

AUTHOR(S)
Koudelka, T.; Kruis, J.; Sysala, S.; Vokáč, M.
PUB. DATE
February 2015
SOURCE
AIP Conference Proceedings;2015, Vol. 1648 Issue 1, p1
SOURCE TYPE
Conference Proceeding
DOC. TYPE
Article
ABSTRACT
The paper deals with numerical modeling of damage evolution in autoclaved aerated concrete (AAC) due to shrinkage. It represents coupled thermo-hydro-mechanical problem where the temperature and moisture transports are fully coupled. The mechanical problem is partially coupled with transport part because the AAC shrinkage is influenced by moisture evolution. These models were implemented to the SIFEL software package and they were used for numerical simulation of drying wall made from AAC blocks.
ACCESSION #
101586053

 

Related Articles

  • The Effect of Temperature on the Mechanical Characteristics of the Nitrogen-Containing 04Kh20N6G11M2AFB Steel under Static Tension. Savrai, R. A.; Makarov, A. V.; Gorkunov, E. S.; Pecherkina, N. L.; Rogovaya, S. A.; Osintseva, A. L.; Kalinin, G. Yu.; Mushnikova, S. Yu. // AIP Conference Proceedings;2016, Vol. 1785 Issue 1, p1 

    The paper describes a complex of research on the study of the mechanical properties, fractographic features of the fracture and evolution of the structure of the nitrogen-containing stainless steel 04Kh20N6G11M2AFB (0.47 wt. % N) with an austenitic structure under static tension at temperatures...

  • Study of the same curing condition of large volume concrete based on maturity methods. Xuefeng Song; Zhihong Fan; Yingfei Wang // Advanced Materials Research;2014, Issue 893, p593 

    This paper used the environmental simulation curing system to cure the concrete specimens, and studied the mechanical properties of the concrete specimens under varying temperature histories, resulting in some suggestions regarding the same curing condition of mass concrete.

  • Non-Autoclaved Aerated Concrete with Mineral Additives. Il'ina, L. V.; Rakov, M. A. // AIP Conference Proceedings;2015, p1 

    We investigated the effect of joint grinding of Portland cement clinker, silica and carbonate components and mineral additives to specific surface of 280 - 300 m2/kg on the properties (strength, average density and thermal conductivity) of non-autoclaved aerated concrete, and the porosity of the...

  • Crack-Tip Strain Field Mapping and the Toughness of Metallic Glasses. Hufnagel, Todd C.; Vempati, Uday K.; Almer, Jonathan D. // PLoS ONE;Dec2013, Vol. 8 Issue 12, p1 

    We have used high-energy x-ray scattering to map the strain fields around crack tips in fracture specimens of a bulk metallic glass under load at room temperature and below. From the measured strain fields we can calculate the components of the stress tensor as a function of position and...

  • ANALYTICAL MODEL FOR CHIP FORMATION IN CASE OF ORTHOGONAL MACHINING PROCESS. Salvatore, Ferdinando; Mabrouki, Tarek; Hamdi, Hédi // AIP Conference Proceedings;1/17/2011, Vol. 1315 Issue 1, p1621 

    The present work deals with the presentation of analytical methodology allowing the modelling of chip formation. For that a 'decomposition approach', based on assuming that the material removal is the summation of two contributions: ploughing and pure cut was adopted. Moreover, this analytical...

  • Crack and mechanical behavior of CFRP plate-reinforced bridge roofs under high temperature with different anchoring measures. Xin Yuan; Chaoyu Zhu; Jiangbei Hu; Yuye Zhang // Latin American Journal of Solids & Structures;2019, Vol. 16 Issue 6, p1 

    This paper investigates the crack and mechanical behavior of CFRP plate-reinforced bridge roof under high temperature with different anchoring measures. Six CFRP-reinforced test beams with different anchoring schemes were designed and constructed. The beam specimens, after the high temperature...

  • Compressive and splitting tensile strength of autoclaved aerated concrete (AAC) containing perlite aggregate and polypropylene fiber subjected to high temperatures. Na Ayudhya, Borvorn Israngkura // Songklanakarin Journal of Science & Technology;Sep/Oct2011, Vol. 33 Issue 5, p555 

    This paper presents the results of an experimental study on the residual compressive and splitting tensile strength of autoclaved aerated concrete (AAC) containing perlite and polypropylene (PP) fiber subjected to high temperatures. Cylinder specimens were subjected to various temperature ranges...

  • Numerical study of cracking a medium elastic viscoplastique of polyacetal. Reffas, Sid Ahmed; Benguidiab, Mohamed; Sikula, Ondrej; Adjlout, Houari; Lebbal, Habib // Mechanics & Mechanical Engineering;2019, Vol. 23 Issue 1, p125 

    The objective of this work is the analysis of the fracture behavior of a SENB cylinder with a defect where stress triaxiality is more severe. Numerical simulations are carried out in a 2D mode, to overcome a disadvantageous hypothesis plane strain or plane stress. The mesh sensitivity studies...

  • A Study on Plastic Zones of 3 Point Bend Specimens under Various Impact Velocities. Moon Sik Han; Jae Ung Cho; Ouk Sub Lee // International Journal of Modern Physics B: Condensed Matter Phys;4/10/2003, Vol. 17 Issue 8/9, p1349 

    In this paper, computer simulations of the mechanical behavior of 3 point bend (3PB) specimens with a quarter notch under impact load are performed. The cases with various impact velocities applied at the side of the specimen are considered. An elastic-plastic von Mises material model is chosen....

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics